Auto Gate Remote Control SMC-5326, MLXY-330Mhz Face to Face Copy

In the configuration and selling process, most clients wish to replace the original remote control with a general remote control, while such remote control has not be developed. You may configure your remote control within 2 seconds if you meet the following three conditions:

• Condition I: the original remote control may be used normally
• Condition II: know the transmission frequency of original remote control (referring to the following diagram)
• Condition III: IC of original remote control is AX5326 AX5326-4 EV1527FP527 HT-12E HS2262 2260 HT600 HT680 HT6207 HT6010 HT6012 HT6014 PT2240 FP527 LX2262 2260 PT2240 PT2242 PT2260 PT2262 PT2264 SC2262 SC2260 SMC5026 SMC5326-3 SMC5326-4 SMC918 SMC918-3 SMC918-4 or without code.  

Product details of Auto Gate Remote Control 31134DP25 MLXY-330Mhz/433Mhz Face to Face Self Copy Remote (DONT HAVE DIP SWITCH)

• This is face to face self copy remote control, no need open the case to setting and dont have dip switch to setting.

This is face to face self copy remote control, no need open the case to setting and dont have dip switch to setting.

Copying Method

1. Resetting before copying: press green & red button on copying remote control at the same time ,after 1~2 seconds press any button 3 times(still holding red button), indicating the resetting is successful. After resetting, press the key of remote control, and LED will be off.
2. Copying: place the product correctly before copying. Place the original remote control and copying remote control on the desk. Use right hand to press the copying remote control until LED is on – off, indicating it enters to copying status. Use left hand to press the button of original remote control. The fast clicking of LED of remote control indicates success in copying.

Learning Type Auto Gate Remote MLXY-330Mhz 

• Price per unit. (500pcs/ctn, H32cm x W38cm x D31cm, 14.5kg)