Teach Combination

Teach to open (using centre opening line), instruction for changing combination number.

A Guide To Combination Lock

To open the combination lock (using center Opening Line)
• Turn anti-clockwise 4 times( 10 ) or ( your 1st number)
• Clockwise 3 times ( 20 ) or ( your 2nd number)
• Anti-clockwise 2 times ( 30 ) or ( your 3rd number)
• Turn clockwise until stop

To change security code

1) Insert existing numbers (e.g. 10-20-30) on setting / resetting line
• Turn anti-clockwise 4 times ( 10 ) or ( your 1st number)
• Turn clockwise 3 times ( 20 ) or ( your 2nd number)
• Anti-clockwise 2 ,times ( 30 ) or ( your 3rd number)
• Stop at the last number. (DO NOT TURN BACK TO “0”)

2) Insert change key into the back panel of the safe
• The L shape key (Set key) must be inserted into the arrow shape hole at the back of the combination lock (Refer to diagram 2.0 marked "A" with arrow pointing downward)
• Set key must be inserted completely pointing downward.(Refer to diagram 2.0 marked" X" shown maximum point of insert.)
• Turn Set key anti-clockwise till it reaches 90 degrees

3) Insert new numbers (e.g. 30-40-50) on setting / resetting line)
• Turn anti-clockwise 4 times (30) or (your 1st number)
• Turn clockwise 3 times (40) or (your 2nd number)
• Turn anti-clockwise 2 times (50) or (your 3rd number), DO NOT USE number between 0 and 20 for your last number.
• Stop at the last number. (Please take note last number must above 20)
• Turn set key clockwise 90 degrees and pull out.
• Changing of combination is completed

Please check using new numbers twice before you close or lock your safe.
Customers are adviced to set simple combination, such as 10, 20, 30, 40, etc.