WT 9503-25mm Silver Combination Cam Lock

WT 9503-25mm Silver Combination Cam Lock
Model: mailbox combination lock
Specifications: diameter 38mm

Lock body material: zinc alloy
Surface treatment: conventional chrome plating, electrophoretic black, matt plating, titanium plating, etc.
Lock body diameter: 19mm;
Thread length: 20mm;
Suitable for 1-15mm plate thickness.
The factory password is: 000
How to change the password: There is a hole for changing the password under the lock. In the open state, use a small stick to top the hole, do not release it, and then change the password. After finishing, let go and the password change is complete. Just mess up the password after locking it
Scope of application: letter box / locker / shoe cabinet / staff cabinet / locker / wooden cabinet, etc.
Instructions for use: The factory password of this lock is 000, which is three zeros. For the first use, set the password to 000, then hold the lock body with one hand (the threaded part, pinch the two parallel surfaces with fingers), and rotate the lock surface with the other hand (that is, the beveled surface with lines), clockwise or counterclockwise 90 degrees. (For the first time, it takes a little more force, and it is easy to turn it a few times) Model: letterbox password lock white
Specifications: diameter 38mm

Lock body material: zinc alloy
Surface treatment: conventional chrome plating, electrophoretic black, matt plating, titanium plating, etc.
Lock body diameter: M19mm;
Thread length: 20mm;
Suitable for 1-15mm plate thickness.
The factory password is: 000
How to change the password: There is a hole for changing the password under the lock. In the open state, use a small stick to top the hole, do not release it, and then change the password. After finishing, let go and the password change is complete. Just mess up the password after locking it
Scope of application: letter box / locker / shoe cabinet / staff cabinet / locker / wooden cabinet, etc.
Instructions for use: The factory password of this lock is 000, which is three zeros. For the first use, set the password to 000, then hold the lock body with one hand (the threaded part, pinch the two parallel surfaces with fingers), and rotate the lock surface with the other hand (that is, the beveled surface with lines), clockwise or counterclockwise 90 degrees. (The first time you use it, you need to be a little stronger, and it will be easy to turn it a few more times)

型号：信箱密码锁白色
规格：直径38mm

1. 锁体材质：锌合金
2. 表面处理：常规镀铬，可做电泳黑、镀亚光、镀钛等
3. 锁体直径：M19mm;
4. 螺纹长度：20mm;
5. 适用于1-15mm板厚。
6. 出厂密码为：000
7. 如何改密码：锁的下方有一个改密码孔，在开启状态下用一个小棒顶这个孔，不要松开，然后更改密码,完成后松手，密码更改完成。 上锁后将密码拨乱就好
8. 适用范围：信箱/ 更衣柜/ 鞋柜/员工柜/储物柜/木柜等
9. 使用说明：此锁出厂密码为000，也就是三个零。初次使用，将密码调至000，然后一只手拿锁身（螺纹部分，手指捏住二个平行面），另一只手旋转锁面（就是带纹的斜面），顺时针或逆时针旋转90度。（首次使用要大力一点，多转几次就很轻松了）型号：信箱密码锁白色

   规格：直径38mm

   1. 锁体材质：锌合金
   2. 表面处理：常规镀铬，可做电泳黑、镀亚光、镀钛等
   3. 锁体直径：M19mm;
   4. 螺纹长度：20mm;
   5. 适用于1-15mm板厚。
   6. 出厂密码为：000
   7. 如何改密码：锁的下方有一个改密码孔，在开启状态下用一个小棒顶这个孔，不要松开，然后更改密码,完成后松手，密码更改完成。 上锁后将密码拨乱就好
   8. 适用范围：信箱/ 更衣柜/ 鞋柜/员工柜/储物柜/木柜等
   9. 使用说明：此锁出厂密码为000，也就是三个零。初次使用，将密码调至000，然后一只手拿锁身（螺纹部分，手指捏住二个平行面），另一只手旋转锁面（就是带纹的斜面），顺时针或逆时针旋转90度。（首次使用要大力一点，多转几次就很轻松了）